Wednesday, 20 July 2016
Built from the experience of over 23,000 Helisem® mixers in service, the HELISEM® line is getting a new life, with numerous benefits:
• Saving energy consumption up to 80% at the same level of agitation
• Mixer weight reduced by 30% on average
• Smaller footprint
• Easier assembly, faster and safer
• Low maintenance
• The range applies to tanks from 50 liters to 400 m3, for viscosities up to 1000 mPas (cP) and S.G. up to 1.3.
For all your applications:
• Water treatment (flocculation, reagent preparation, milk of lime storage, pH control ...
• Formulation of consumable products (detergents, paints, inks ...)
• All additive préparations
A wide range:
Standard options to cover many applications:
• Range with 1 or 2 propellers
• Range for 50Hz or 60Hz electrical supply
• Range for ATEX zone 1 or 2
• Outdoor installation
• Installation in wet area
• Coating for operating in corrosive media
The HELISEM are offered worldwide through a distribution netwotk specifically trained to offer a complete quotation in few minutes.
• And always on-time delivery from 5 days!
Select HELISEM is an active contribution in sustainable development!
Wednesday, 15 April 2015
Helimix folding blade mixer neatly solves the problem of products stored in IBC containers that need to be regularly mixed to stop separation and deposits. It offers an unbeatable package of folding blades, three different drive options, variable speeds, lightweight build, and easy installation, offering the perfect mixing solutions for solid suspensions and liquid blending such as paints, varnishes, lime milk, oils, syrup, inks, eggs, sorbitol, additives, coating, slurries and more.
Indeed many products, during transportation and storage in an IBC may separate, with solid particles that settle or viscous products that become "frozen". Helimix's large rotating blades fold to a slim 70 mm when closed, allowing easy insertion into the IBC container with their 140 mm openings. Once in the container, the propellers and floding blades open to 230 mm to get to all four corners of the container, meaning the best possible agitation to re-homogenise solutions.
Features and Benefits
Simple and efficient design:
- Large folding blades: operating volume from 100 l (26.4 gal) to 1000 l (264.2 gal)
- Low weight (20 kg/44 lb max.)
- Ease of installation:
* Quick side installation with hooks
* Easy mounting through 140 mm (31.5 in) IBC opening
Several options available to suit your application:
- Three possible handling devices: fork lift, crane, by hand
- 4 types of designs: low or high speed, folding or marine impeller, electrical or air drive
Find out more by contacting firstname.lastname@example.org
Wednesday, 23 July 2014
Storage of crude oil requires modest but effective agitation for two main reasons:
-to maintain in suspension the particles (sand, paraffin, water drops), in fact the risk of deposition process causes disturbances such clogging of pipes, increasing losses, lower operating volume, non-constant quality and require tedious and costly cleaning ......
-to homogenize the different qualities of crude poured into the tank to prevent stratification to feed downstream process with a product with constant characteristics.
Only one agitator located on the side on the wall of the vessel may be equipped storage vessels whose diameter is 200 m (200 000 m3).
MILTON ROY MIXING SOLUTION:
MILTON ROY MIXING offers a range dedicated to this operation, implementation of an extensive study by simulation of fluid dynamics (CFD) to optimize:
-the propeller type and the number of agitators
-the respective positions of mixers in the tank
-a minimum power consumption
-looking for a mature solution in terms of mechanical design (fewer parts, lighter)
-the reliability (absolute leak-proof device, quick maintenance by a patented device.
MILTON ROY MIXING side entry agitators be mounted quickly and easily on the tank with a propeller diameter allowing direct installation.
-prevent the deposition of sludge and water in crude oils and condensates
-mixture of different crude oils
Diesel gas oil, fuel oil, kerosene, bitumen, naphtha, ethanol, biodiesel, lubricants, waste .....:
-belt gear driven
-high efficiency Sabre ® propeller
-consistent results thank to CFD analysis
-fast and reliable system for an optimal alignment and tensioning
-easy installation and maintenance
-shorter mixing times
-long product life
-shut off device to remove the seal cartridge while tank is full of liquid
-short lead times
-higher energy saving
-from 629 to 1.3 MM Barrels / 100 to 200 000 m3
-operation up to 480°F/ 250 ° C
-single mechanical seal
-power up to 70HP/55 kW
-IEC and NEMA Standards
-50 and 60-Hz
-TEFC, Ex-proof, IEEE-841 and ATEX available
-seal double controls for leak prevention
-angle shaft variable
-316 SS, Duplex steels
Monday, 29 July 2013
For the coming years, Milton Roy Mixing wants to focus on a crucial point that will be a big issue : The sustainable development.
Milton Roy Mixing feel concerned in the manufacturing of recyclable products, and the different ways to limit the footprint on the way we create our products.
Please click on the link bellow to know more about our plan to improve our working conditions
Monday, 1 July 2013
Milton Roy Mixing gives you all his wishes for the coming year. The guiding lines will be : innovation, environment, and respect Click on the link bellow to access to our animated wishes.
Tuesday, 27 November 2012
Milton Roy Mixing is pleased to annonce to its customers that its MIXING SCHOOL WHICH PROVIDES AGITATION TRAINING IS FROM NOW AN OFFICIAL APPROVED CENTRE, officialised by the French State
Our number of activity statement: 11 77 05268 77
If you want to participate to one of our training, do NOT hesitate to fill the form on the link bellow so that we can plan together the training that will perfectly match with your expectation.
Monday, 15 October 2012
In order to answer to a growth of activity in some outside European Zone areas, Milton Roy Mixing has acquiered the gost certification to proove the sign of trust that we provide to every customer.
Please follow the link to know more about Milton Roy Mixing certifications.
Monday, 30 July 2012
Do no hesitate to fill our easy and well targeted questionnaire, our expert will answer to your request as soon as possible.
Friday, 20 July 2012
Milton Roy Mixing always garantee its high excellence level thanks to the support of all our team for the environmental management and the quality management in our company. Milton Roy Mixing is proud and knows that it is its duty to be certified ISO 9001 & 14 001, it is order to assure our commitment to our customers.
Friday, 23 March 2012
Milton Roy Mixing has developped a new range of floating agitator HELIFLOAT allowing the suspending and the homogenization of solid particles in large basins or tank of water treatment!